.png)
Never Do This Mistake If You Are HVAC Mechanical Or Control Contractor
Common challenges in BMS implementation include delays or inaccuracies in submitting the design control documents at the site and creating multiple uncontrolled revisions. DDC panel sizing may be incorrect, often requiring on-site changes. Issues like improper or inconsistent I/O point tagging, mismatches between database and DDC program, and configuring alarms/trends for unnecessary points can affect system performance.
1. Design Control Submittal At Site
2. Creating Multiple Revisons on Control Submittal
3. DDC Sizing at Site And Changing Panel
4. Standard Input Output Point Tagging Not Appropriate
5. Input Output Point Tag Mismatch Between Database And DDC Program
6. Alarms And Trends Configure in Database For All The Points Instead Necessary Points
7. Graphics Navigation For Equipments Not Followed In Sequence
8. Zone Mask Not Configure In 3D Floor Plan
9. Consistently Not Generate Building Automation Analysis Report and Not Reviewing With BMS Consultant
.jpg)
.jpg)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
